SHANDONG GUOJIE NEW MATERIALS CO., LTD.
PRODUCT CENTER
Steel coils are classified according to their professional uses, including oil drum plates, bulletproof plates, shipbuilding plates, automobile plates, construction plates, machining plates, etc.
Specializing in the production and sales of carbon steel coils, factory direct sales, product grades and specifications are complete, and can certainly meet your various needs, welcome to consult
1. Power industry -- fan blades, burner pipelines, feeder and hopper lining, crusher parts, coal grinder parts, ash pipes, air
handling systems and conveyors;
2. Have spentIron and steel industry - hopper lining, grille, feeder and base, dump truck, hopper, pipe, pump shell, crusher
parts, slag trough, various chassis, vibrating screen;
1. For pipelines. Water, gas pipes, steam pipes, and oil and gas trunk lines. 2. Tubes for thermal equipment. Superheating pipes, high temperature and high-pressure boiler pipes for locomotive boilers. 3. For the machinery industry. Aviation structural tubes, automobile axle tubes, tractor structural tubes, etc.
Stainless steel coils are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.
Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on the surface of the steel known as the passive layer. This prevents any further corrosion of the surface. Increasing the amount of Chromium gives an increased resistance to corrosion.
Stainless steel pipe is mainly used for three purposes:
1. Stainless steel decorative pipe
In fact, it is a stainless steel pipe used for decoration, which is mainly widely used in stainless steel anti-theft windows, stair guardrails, stair handrails, etc.
2. Stainless steel industrial pipe
It is divided into seamless pipe and welded pipe.
Scope of application: due to the thin stainless steel welded pipe and good surface treatment effect, it is mainly used for architectural decoration products, civil decorative art stainless steel products, etc. The stainless steel industrial pipe has thick wall, uneven surface and strong bearing capacity. It is mainly used to make large size, high strength, high toughness, mechanical systems and other products.
3. Stainless steel product pipe
Stainless steel product pipe refers to the stainless steel pipe specially customized by the stainless steel pipe manufacturer because the ordinary stainless steel decorative pipe does not meet its use requirements.
The surface of theGalvalume Coil is a unique smooth, flat and gorgeous star, and the basic color is silver white. The special coating structure makes it have excellent corrosion resistance. The normal service life of the Galvalume Coil can reach 25a, and the heat resistance is very good, which can be used in the high temperature environment of 315 ℃; The coating has good adhesion with the paint film, has good processing performance, and can be punched, sheared, welded, etc; The surface conductivity is very good.
Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.
I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam
H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
Rebar refers to steel used for reinforced concrete and prestressed reinforced concrete. Its cross section is round, sometimes square with rounded corners. Including plain round reinforcement, ribbed reinforcement and twisted reinforcement.
Reinforcement for reinforced concrete refers to straight or coiled steel used for reinforcement of reinforced concrete. Its appearance is divided into smooth round reinforcement and deformed reinforcement, and the delivery status is straight bar and coiled round reinforcement.
Galvalumed sheet, with 55% aluminum zinc alloy coating on the surface. The surface of the Galvalumed sheet presents a unique smooth, flat and gorgeous star, and the basic color is silver white. The special coating structure makes it have excellent corrosion resistance. The normal service life of the Galvalumed sheet can reach 25a, and the heat resistance is very good, which can be used in the high temperature environment of 315 ℃; The coating has good adhesion with the paint film, has good processing performance, and can be punched, sheared, welded, etc; The surface conductivity is very good.
CONTACT US
Building 8, Xingguang International Finance Center, Liaocheng City, Shandong Province.
MESSAGE
Copyright © SHANDONG GUOJIE NEW MATERIALS CO., LTD. Powerby : CEGLOBAL SEO Privacy Statement
